F Series - Shanghai ANOKY Group Co., Ltd.

Characteristics
Dyeing Process
Shades and Reference Data
Nylon Pretreatment
Dyeing Parameters

Characteristics

Light to Dark Shades

Suitable for light to medium-dark shades

Full Shade Compatibility

Good dye compatibility, complete color range, bright shades

Optimal Trichromatic

Excellent trichromatic compatibility

Fixation Required for Depth

Good fastness, medium-dark shades need fixation

Economical & Metal-Free

Cost-effective, free from metal ions

Simple Process & Easy Operation

Simple process, easy to operate

Dyeing Process

A.	0.5~1.0	g/L	ANOKE® Wetting & Defoaming Agent FFA
	0.5~2.0	%	ANOKE® Leveling Agent YY-B213
	0.5~2.0	g/L	Sodium Acetate / Ammonium Acetate
	X	%	Acetic Acid 80%
	pH 4.0~7.0
B.	Y	%	ANOSET® Dyestuff

Shades and Reference Data

ANOSET®F Bright Shade Dyestuff	Shade	Solubility (g/L) (g/L)	Light Fastness ISO 105-B02		Washing Fastness ISO 105-C02		Acid Perspiration Fastness ISO 105-E04		Alkaline Perspiration Fastness ISO 105-E04		Water Resistance Fastness ISO 105-E01		Rubbing Fastness ISO 105-X12		Chlorine Water Fastness ISO105 -E03 20ppm
ANOSET®F Bright Shade Dyestuff	%	90℃	1/3SD	1/1SD	Color Change	Nylon	Color Change	Nylon	Color Change	Nylon	Color Change	Nylon	Dry Rubbing	Wet Rubbing	Color Change
Flu.Yellow FG	1.2	60	3-4	3-4	4	4	4	4	4	3-4	4-5	4-5	4-5	4-5	3-4
Yellow 4G	1.3	70	6	6-7	4-5	4-5	4-5	4-5	4-5	4-5	4-5	4-5	4-5	4-5	3-4
Yellow R	1	80	6-7	7	4-5	4-5	4-5	4-5	4-5	4-5	4-5	4-5	4-5	4-5	4-5
Orange GS	1.4	60	5	6	4-5	4-5	4-5	4-5	4-5	4-5	4-5	4-5	4-5	4-5	4-5
Red 3G	1	50	4	4-5	4-5	4-5	4-5	4-5	4-5	4-5	4-5	4-5	4-5	4-5	4-5
Red FR	1.8	50	5	5-6	4-5	4-5	4-5	4	4-5	4	4-5	4-5	4-5	4	4
Red FG	1.2	50	4	4-5	4-5	4-5	4-5	4-5	4-5	4-5	4-5	4-5	4-5	4-5	4-5
Red 2BF	1.2	90	5	5-6	4-5	4	4-5	4-5	4-5	4	4-5	4-5	4-5	4-5	4-5
Red 3B	0.85	60	3	3-4	4-5	4-5	4-5	4-5	4-5	4	4-5	4	4-5	4-5	4-5
Green 2G	1.8	30	6	6-7	4-5	4-5	4-5	4-5	4-5	4-5	4-5	4-5	4-5	4-5	4
Green BG	1.2	50	6	6-7	4-5	4-5	4-5	4-5	4-5	4-5	4-5	4-5	4-5	4-5	4
Turq.Blue 3G	1.2	70	3	3-4	4-5	4	4-5	4-5	4-5	4	4-5	4	4-5	4-5	4
Blue R	2	80	6	6-7	4-5	4	4-5	4-5	4-5	4-5	4-5	4	4-5	4-5	4
Brill Blue 6B	2	90	3	3-4	4-5	4	4-5	4-5	4-5	4	4-5	4	4-5	4-5	3

Nylon Pretreatment

Presetting

To avoid creases, curling, and heat shrinkage during the dyeing of nylon fabrics, they must undergo desizing, scouring, and bleaching, followed by heat-setting prior to dyeing, with rapid and uniform cooling to achieve dimensional stability. However, for fabrics requiring a crepe effect, setting should only be carried out after dyeing at 150–160°C.

Recommended Process:

Type	Nylon 6		Nylon 6.6
Regular Nylon	180~195℃	15–20 seconds	210~220℃	15–20 seconds
Bulk Nylon	Below 160°C	10–20 seconds	Below 180°C	10–20 seconds

Desizing and Scouring

To remove sizing agents, oils, and impurities acquired during weaving, handling, and transportation, the following process is adopted:

1.0~3.0	g/L	ANOKE® Chelating Dispersant A-137
1.0~5.0	g/L	ANOKE® Deoiling Agent A-130
1.0~2.0	g/L	Soda Ash

Treat in water at 80°C with pH adjusted to 9.5–10 for 30 minutes, followed by thorough rinsing.

Dyeing Parameters

Dyeing Temperature

Type	Nylon 6	Nylon 6.6
Regular	95~100℃	108~120℃
Bulk or High-Density Microfiber	108~120℃	120℃