M Series - Shanghai ANOKY Group Co., Ltd.

Characteristics
Dyeing Process
Shades and Reference Data
Nylon Pretreatment
Dyeing Parameters

Characteristics

Medium to Dark Shades

Suitable for medium to dark shades

Broad Spectrum & Wide Gamut

Complete color range, wide color gamut coverage

Optimal Trichromatic

Excellent trichromatic compatibility with high build-up

High Fixation for Nylon Blends

High exhaustion and fixation, suitable for nylon blend dyeing

Excellent Reproducibility & Fastness

Good reproducibility, excellent color fastness

Dyeing Process

A.	0.5~1.0	g/L	ANOKE® Wetting & Defoaming Agent FFA
	0.5~2.0	%	ANOKE® Leveling Agent YY-B213
	0.5~2.0	g/L	Sodium Acetate / Ammonium Acetate
	X	%	Acetic Acid 80%
	pH 4.0~7.0
B.	Y	%	ANOSET® Dyestuff

Shades and Reference Data

ANOSET®M Modified 1:2 Metal Complex Dyestuff	Shade	Solubility (g/L)	Light Fastness ISO 105-B02		Washing Fastness ISO 105-C02		Acid Perspiration Fastness ISO 105-E04		Alkaline Perspiration Fastness ISO 105-E04		Water Resistance Fastness ISO 105-E01		Rubbing Fastness ISO 105-X12		Chlorine Water Fastness ISO105 -E03 20ppm
ANOSET®M Modified 1:2 Metal Complex Dyestuff	%	90℃	1/3SD	1/1SD	Color Change	Nylon	Color Change	Nylon	Color Change	Nylon	Color Change	Nylon	Dry Rubbing	Wet Rubbing	Color Change
Yellow 4GN	1.4	100	5-6	6	4-5	4-5	4-5	4-5	4-5	4-5	4-5	4-5	4-5	4-5	4
Yellow 2R	1.5	80	5-6	6	4-5	4-5	4-5	4-5	4-5	4	4-5	4-5	4-5	4-5	4-5
Red 2B	1.8	80	5-6	6	4-5	4	4-5	4-5	4-5	4	4-5	4-5	4-5	4-5	4
Red G	1.2	100	5-6	6-7	4-5	4	4-5	4-5	4-5	4-5	4-5	4-5	4-5	4-5	4
Bordeaux B	1.0	80	5	5-6	4-5	4	4-5	4-5	4-5	4-5	4-5	4-5	4-5	4-5	4
Dark Bord. GR	2.0	80	6	6-7	4-5	4	4-5	4-5	4-5	4	4-5	4-5	4-5	4-5	4
Blue 2R	2.0	90	5-6	6	4-5	4	4-5	4-5	4-5	4	4-5	4-5	4-5	4-5	3-4
Dark Blue GL	3.0	70	6	6-7	4-5	4	4-5	4-5	4-5	4-5	4-5	4	4-5	4-5	4
Navy R	3.0	80	5-6	6	4-5	4-5	4-5	4-5	4-5	4-5	4-5	4-5	4-5	4-5	4
Grey G	1.5	80	6	6-7	4-5	4	4-5	4-5	4-5	4-5	4	4-5	4-5	4-5	4-5
Black GF	4.0	80	5-6	7	4-5	4-5	4-5	4-5	4-5	4-5	4-5	4-5	4-5	4-5	4
Black AW	4.0	100	5-6	6-7	4-5	4	4-5	4-5	4-5	4-5	4-5	4-5	4-5	4-5	4

Nylon Pretreatment

Presetting

To avoid creases, curling, and heat shrinkage during the dyeing of nylon fabrics, they must undergo desizing, scouring, and bleaching, followed by heat-setting prior to dyeing, with rapid and uniform cooling to achieve dimensional stability. However, for fabrics requiring a crepe effect, setting should only be carried out after dyeing at 150–160°C.

Recommended Process:

Type	Nylon 6		Nylon 6.6
Regular Nylon	180~195℃	15–20 seconds	210~220℃	15–20 seconds
Bulk Nylon	Below 160°C	10–20 seconds	Below 180°C	10–20 seconds

Desizing and Scouring

To remove sizing agents, oils, and impurities acquired during weaving, handling, and transportation, the following process is adopted:

1.0~3.0	g/L	ANOKE® Chelating Dispersant A-137
1.0~5.0	g/L	ANOKE® Deoiling Agent A-130
1.0~2.0	g/L	Soda Ash

Treat in water at 80°C with pH adjusted to 9.5–10 for 30 minutes, followed by thorough rinsing.

Dyeing Parameters

Dyeing Temperature

Type	Nylon 6	Nylon 6.6
Regular	95~100℃	108~120℃
Bulk or High-Density Microfiber	108~120℃	120℃